To achieve the perfect wallpapering effect, proper preparation of the wall surface is crucial. A properly prepared surface guarantees not only better adhesion of the wallpaper, but also a longer lasting effect. Before you start wallpapering, make sure that the wall is thoroughly cleaned and leveled.The first step is to remove the old wallpaper and any loose pieces of paint or plaster. The work scheme also includes checking the condition of the surface for cracks and irregularities. If the wall needs to be repaired, it is recommended to fill all the cracks with putty.It's time to thoroughly clean the wall of dust and wipe the surface with a damp cloth. The next step is to prime the wall with a special preparation that will improve the adhesion of the glue to the wallpaper. It is important to use a product suitable for the type of surface on which the wallpaper will be applied.Basic tools and materials needed for wallpapering
Preparing the right tools and materials is a key step in making wallpaper effective and efficient. Here is a complete list of necessary items:Wallpaper glue – there are many types of glue, but for non-woven wallpaper it is recommended to use a special glue that is easy to use and provides a strong grip.
A paint roller is used to evenly apply glue to the wall.
Angled brush – helps to apply glue precisely in hard-to-reach places.
Wallpaper Cutter – allows you to precisely cut the wallpaper.
Ruler and level — for marking vertical and horizontal lines, which will help you to accurately paste wallpaper.
A pressure roller for wallpaper – allows you to evenly distribute the wallpaper and remove air bubbles.
The bucket is for mixing glue.
Sponge is used to remove excess glue and dirt from the surface of newly glued wallpaper.
Preparing all these items before starting work will greatly simplify the process and help avoid downtime associated with the need to find missing tools.How to glue non-woven wallpaper
After the wall is prepared and all the tools and materials are at hand, you can begin the direct process of wallpapering. Gluing non-woven wallpaper is relatively easy if you follow a few basic rules.Applying glue – Unlike traditional wallpaper, where glue is applied directly to the wallpaper, in the case of non-woven wallpaper, glue is applied to the wall. Spread the glue evenly over the wall surface using a roller. Be sure to use enough glue to ensure that the wallpaper adheres well.
Gluing wallpaper strips — start from the top of the wall. Glue the first strip of wallpaper to the wall, making sure that it is positioned strictly vertically. For this purpose, you can use a level or a plumb line. Press the wallpaper from the center to the edges to avoid air accumulation under the surface. The wallpaper roller will help to remove air bubbles.
Edge trimming – Excess wallpaper can be trimmed with a paper knife. It is best to trim the baseboard along the floor or ceiling. It is recommended to use a ruler to ensure an even cut.
Removing excess glue . If the glue gets on the surface of the wallpaper, remove it with a damp sponge. Careful cleaning of the wallpaper will prevent the appearance of ugly glue marks.
Gluing the ceiling with non-woven wallpaper may require additional assistance. It's a good idea to ask someone to hold long strips of wallpaper so that the process runs more smoothly.This process can take a long time, but careful execution of each step will ensure a perfect end result. Thanks to the above tips, even people who do not have much experience in wallpapering will be able to achieve professional results.Regardless of whether you are renovating the entire apartment or just one room, properly installed non—woven wallpaper is an investment in the aesthetics and functionality of your interior. Upptäck Smarkets och börja spela idag.

Läs mer om riktlinjerna för branschråden här

Läs mer om möjlig projektfinansiering av branschrådsinitiativ här